PROBLEM SOLVERS SPECIAL ADVERTISING SECTION
Camfil Air Pollution Control
Your manufacturing plant or weld shop produces problem fumes
and contaminants (hex chrome, nickel, zinc oxide, manganese),
so it’s a priority to keep your workplace clean and personnel safe
from exposure. You also want to make sure you are in compliance with OSHA regulations. The fume extraction systems that
you’ve seen in other shops have bolted-on or remote-mounted
HEPA filters that require expensive, awkward ducting configurations, additional transitions and supports requiring more of your
valuable space. You want a more cost-effective solution.
A dust collection system with secondary HEPA will solve this
challenge. Select an ambient fume collection system with an
integrated Safety Monitoring Filter (iSMF). The iSMF-HEPA filter
unit is installed at the factory on top of the fume collector, which minimizes the total footprint. No additional
ductwork, transitions or supports are required to achieve a DOP efficiency of 99.97% on 0.3 micron particles.
The filter is positioned prior to the fan so that it is kept at negative pressure, which securely contains the captured contaminants. The filter location also makes it easy to access the filter when you need to change it. The
iSMF also provides a redundant system that can monitor the condition of the primary filter and arrest flames that
occur from combustible dust incidents.
When you partner with a reputable equipment supplier like
Camfil APC, you get access to a whole team of fume collection
specialists who have worked in hundreds of shops and solved
the toughest air quality challenges. They are knowledgeable
about OSHA, NFPA, and EPA requirements, and can develop an
engineered solution that fits your needs. When you use a Camfil
safety monitoring filter with HEPA, the company guarantees that
you will have zero weighable emissions.
Advantages of an Integrated Safety Monitoring Filter:
• Low installation cost: Installed at the factory
• No measurable emissions: Incorporates a Camfil HEPA
• Hazardous fumes contained: All filters are on the negative pressure side of the system
HOW TO CAPTURE AND CONTAIN DANGEROUS WELD FUMES